The leveling machine is mainly used to straighten all kinds of plates and plates cut into blocks, and is suitable for the leveling of all kinds of cold and hot rolled plates., So what is the function of the leveling machine to the metal plate?

1. Improve the quality of sheet metal

leveling machine is a kind of precision machine used to correct the defects of coil and plate. These defects include longitudinal curl, transverse warpage, twist, edge sickle bend, wavy edge, coil crack and central concave convex, etc. If we use the leveling machine, these defects can be well solved, so that the quality of the whole metal plate will be improved.

2. Stress removal of materials

The stress in the material can be removed by leveling the plate with a leveling machine, mainly because the leveling technology can selectively extend all parts of the material. In order to obtain a consistent fiber length, the shorter part of the plate fiber is extended proportionally below the yield point of the material.

Its realization is to make the material bend up and down circularly with a smaller radius of curvature when passing through the leveling machine, so as to lengthen the shorter material fiber. When the sheet moves towards the outlet of the leveling machine tool, the amplitude of up and down bending decreases gradually, so as to eliminate the material deformation caused by severe bending at the leveling inlet of the machine tool.

3. Suitable for high strength materials

Due to the increasing application of high tensile strength materials in metal sheet metal industry, the leveling of materials requires a large leveling pressure. In the leveling process, the higher leveling pressure will have an impact on the structure of the machine tool and the leveling roll. The equipment is very important to improve the leveling quality and the service life of the machine tool.