1. This machine is a reinforced high-precision sheet material precision leveling machine, which is suitable for precision roller leveling of metal sheets and strips with a thickness of 0.5-3.0mm;

2. The 13 rollers of the upper and lower rollers of the precision leveling machine SHS series are covered with rubber. The material is resistant to acid and alkali, wear and compression, and will not have any scratches on the material;

3. The leveling inner drum of this model is made of imported chrome steel and heat treated to HRC60. Post-grinding, then hard chrome-plating and post-grinding to ensure the uniformity of the hard chrome layer and the shape tolerance of each shaft; the surface of the drum is ground and polished to prevent the material product from being damaged by the rotation and extrusion of the drum;

4. There are two adjustable springs on the feeding upper drum of the leveling machine to adjust the feeding pressure, and manually adjust the feeding gap to make feeding smoother;

5. The leveling adjustment of the high-precision thick plate and sheet leveling machine is adjusted by the turbine elevator, controlled by four precision dial indicators (accurate to the drop point of 0.01mm), and the leveling is in the form of the whole surface descending, which makes the leveling accuracy High, the speed adjustment is more convenient and simple, the leveling method is to achieve high-precision leveling effect by the internal stress of the material after the product is pressed by multiple rollers, and the highest leveling accuracy can reach 0.05mm/(Cut diagonal 100*100mm)

6. The leveling speed is 0-15m/min, and the Delta frequency converter is used for frequency control, and the manual knob can be adjusted as needed;

7. HS series sheet high-precision leveling machine is suitable for high-precision leveling of metal sheets. Auxiliary stainless steel pallets are installed at the inlet and outlet of the machine to facilitate the handling of sheet products in and out;

8. Double row chain drive, thickened gears.

9. It is suitable for precision leveling of various metal 0.5-3.0mm metal strips/sheets and sheets, mainly for materials with high surface requirements such as aluminum plate, copper plate, stainless steel, etc. This series of leveling precision is high, and it is not easy to level after deformation rebound;