1. The material leveling machine is suitable for the leveling of 0.5-3.0mm thick medium plate materials. The leveling roller is ￠60mm, and the upper 3 and the lower 4 arrangement are suitable for the continuous production of stamping parts in various hardware factories, electronic factories and parts factories.

2. The rollers are heat treated, plated hard and ground to prolong the service life of the rollers.

3. It adopts simple electrical box control, easy to operate the machine, simple structure and economical.

4. The L-shaped induction frame is used for induction contact control, which is safe, reliable and simple.

5. Handwheel adjustment, scale reference, intuitive and easy to understand, easy to operate.

6. After the material is corrected, it is smooth and smooth without indentation, and does not damage the surface of the material.

7. The control adopts 24V induction current, which is safe and stable. At the same time, the delayed start-up time can be adjusted according to the demand, avoiding frequent start-up and prolonging the service life.

8. This machine can be used alone, and can be used with MT type and MTC type, with good effect, low failure rate and easy maintenance.

9. According to the needs of the discharge speed, the stepless speed change device can be used instead.

●Standard accessories:

L-shaped induction rack

●Special accessories:

Four-point fine-tuning device (with dial indicator) Inverter for leveling machine Infeed air pressure opening device Photoelectric induction device

Remarks: All machining, inspection and assembly are completed independently by us to ensure the quality of the material straightening machine.